Product details
The Maxi-Grid 550 25″ High Link Panel is the antimicrobial, heavy-duty variant in the 25″-high linked panel line — pre-linked 3-ply MERV 8 panels with two key upgrades over the standard MG300 25″ Link: the media is treated with an antimicrobial agent to inhibit microbial growth on captured organic matter, and the internal support wire is heavy-duty for maximum frame rigidity in demanding side-access installations. Initial pressure drop is 0.28″ w.g. at 400 FPM per panel with a dust holding capacity of 268 grams at 1.5″ w.g., identical to the MG300 25″ Link.
What link panels are and why they matter
Link panels are pre-linked continuous strips of individual filter panels designed to drop into side-access filter housings as a single unit. Standard panel filters (front-access) install one panel at a time into a holding frame; link panels replace an entire row of filters in one motion. Two operational benefits result:
- Eliminated air bypass: Conventional individual panels can leave gaps between filters or at the end of a track, allowing unfiltered air to pass through. Link panels are continuously joined — no gaps, no bypass.
- Faster installation and removal: Maintenance personnel pull and replace one continuous unit per filter track instead of multiple individual panels. Significant labor savings on large air handlers.
This product covers the 25″-high panel section of the Maxi-Grid MG550 link line — the maximum panel-section height in the standard Maxi-Grid family. Each linked unit is built around 25″-tall individual panel sections joined together. Choose the number of panels (2 through 8, or the 24-panel Master Link) based on the length of your housing track, and the panel width (25″x12″ through 25″x25″) based on your housing depth.
25″ vs. 24″ panels — which do you need?
The 25″ line is the maximum height in the standard Maxi-Grid Link family, and the extra inch over the 24″ line matters in retrofit situations where the housing track is just slightly taller than 24″. Always measure your filter track height before ordering — if your track is 25″ tall, ordering 24″ panels will leave a 1″ bypass gap at the top of the track, which defeats the purpose of using link panels in the first place.
Need a different panel-section height?
If your housing uses shorter filter tracks, see the matching Koch Maxi-Grid MG550 24″ High Link Panel, 20″ High Link Panel, 16″ High Link Panel, or 12″ Standard Link Panel. Same construction, same MERV 8 rating, same case-pack pricing model — just sized for shorter housings.
When Maxi-Grid MG550 25″ Link Panel is specified
- Healthcare and clinical facilities with 25″ side-access housings — antimicrobial treatment is meaningful for biological-load environments
- Food processing and hospitality in large 25″ side-access configurations
- High-moisture installations — humid and condensing environments where standard panel media might support microbial growth
- Demanding commercial 25″ side-access AHUs — heavy-duty wire support adds rigidity for installations with rough handling or vibration
- Long-cycle commercial HVAC — antimicrobial protection extends practical service life between changeouts
Sizing the link panel to your housing
Each 25″ link panel is identified by two dimensions:
- Panel count: How many 25″-tall panels are linked end-to-end. Available from 2-panel (24″-26″ total length range) up through 8-panel (200″-208″ total), plus the 24-panel Master Link (continuous extra-long unit). Select the count that matches your housing track length.
- Panel width: 25″x12″, 25″x16″, 25″x18″, 25″x20″, 25″x22″, or 25″x25″. Match to your housing depth.
The 25″ line offers 6 panel widths ranging from very narrow (25″x12″) to fully square (25″x25″) — covering the full housing-depth range at the maximum standard panel-section height.
Design and construction
- Panel height: 25″ (per individual panel section)
- Configuration: Pre-linked continuous panel filter for side-access housings, 3-ply construction
- Media: 100% synthetic, progressively dense (suitable for high-moisture applications)
- Frame: Self-sealing design with steel internal support wire (heavy-duty)
- Tackifier: Downstream
- Antimicrobial: Yes (media-side treatment)
- Efficiency rating: MERV 8 per ASHRAE Test Standard 52.2
- Initial pressure drop: 0.28″ w.g. at 400 FPM face velocity (per panel)
- Dust holding capacity: 268 grams at 1.5″ w.g. final pressure drop (per panel)
- Listings: UL Classified per UL Standard 900
- Reference bulletin: Koch K-902
What MERV 8 captures
Captures dust mite debris, pollen, mold spores, pet dander, and most household and office airborne dust. The standard residential and commercial efficiency for everyday indoor air quality, balancing capture performance with airflow.
Antimicrobial treatment
The MG550 Link Panel media is treated with an antimicrobial agent that inhibits the growth of bacteria, fungi, and other microorganisms on captured organic matter (dust, skin cells, pollen, etc.). This makes the MG550 a strong choice for installations where captured biological material would otherwise become a substrate for microbial growth over the filter’s service life — healthcare environments, food processing, hospitality, and high-occupancy commercial buildings. The antimicrobial treatment protects the filter media itself; it does not actively kill airborne pathogens passing through the filter.
Choosing across the Maxi-Grid 25″ Link Panel line
Koch offers four Maxi-Grid sub-lines in the 25″ high link panel format:
- MG200 25″ Link (MERV 7): Most economical, 3-ply, downstream tackifier. Equipment protection and prefilter applications.
- MG300 25″ Link (MERV 8): All-purpose workhorse, 3-ply, lowest pressure drop in the line. Standard commercial HVAC.
- MG400 25″ Link (MERV 11): Higher efficiency, 4-ply, higher pressure drop. Light-industrial and high-IAQ commercial.
- MG550 25″ Link (MERV 8): Antimicrobial-treated 3-ply with heavy-duty wire support. Healthcare, food processing, high-moisture sites.
Form-factor decision: 25″, 24″, 20″, 16″, or 12″ Link — or Standard Panels?
- This product (25″ Link): Pre-linked continuous panels, 25″-tall sections, for side-access housings with 25″ filter tracks. The maximum standard Link Panel height.
- 24″ Link Panel (sister product): Same construction, 24″-tall sections.
- 20″ Link Panel (sister product): Same construction, 20″-tall sections.
- 16″ Link Panel (sister product): Same construction, 16″-tall sections.
- 12″ Link Panel (sister product): Same construction, 12″-tall sections, for housings with 12″ tracks.
- Standard Panel (front-access): Individual panels installed one-by-one into front-access holding frames. Different form factor entirely.
Sizing and ordering notes
- Confirm your housing track length, depth, and panel-height requirement before ordering. Match panel count to track length, panel width to housing depth, and panel-section height (25″ here) to your filter track. Ordering the wrong panel-height creates bypass gaps that defeat the purpose of link panels.
- Sold by the case. Carton quantity varies by panel count: 2-panel link = 12 units per case; 3-panel = 8; 4-panel = 6; 5-panel = 5; 6-panel = 4; 7-panel and 8-panel = 3; 24-panel Master Link = 1 per case. The variant price is the case price.
- Need a non-standard length, width, or height? Request a quote for custom link configurations or facility-scale orders.
Commercial & facilities
Buying filters for a building?
Volume pricing on any size or MERV, plus recurring delivery schedules. We handle facilities and commercial orders daily and can usually match or beat distributor pricing.
A filtration company, not a warehouse reseller
Family-founded in 2006, built on the back of 50 years of HVAC filtration experience. Two decades selling filters online — and we only stock what we'd put our own name behind.
Trusted manufacturers only
Every filter we sell comes from a manufacturer we've vetted — AAF Flanders, Koch, NaturalAire, PrimeShield, and a short list of others.
No marketplace-style third-party sellers swapping inventory. No overseas knockoffs relabeled with a domestic-sounding name.
Two decades online
RememberTheFilter.com has been selling HVAC filters online since 2006 — family-founded, founder-operated, and still run by the people who started it.
Schools, clinics, property managers, and homeowners have been ordering from us for years — some of them since before Amazon even sold filters.
Nationwide shipping network
Our distribution network ships from multiple U.S. locations — so most orders arrive faster than coast-to-coast routing would suggest.
Customer service is based in Lake Stevens, Washington — U.S.-based, reachable by phone, text, or email.
Buying this filter for a property, fleet, or facility?
Schools, clinics, property management, multifamily, and government facilities order from us in standing rotation. Volume pricing, tax-exempt setup, and scheduled delivery available.
What customers say about Koch Maxi-Grid MG550 Antimicrobial Heavy-Duty 25" High Link Panel Filter MERV 8 - Sold by the Case
Answers to the questions we get every day
From sizing and MERV ratings to bulk orders and subscriptions — here's what customers ask before they buy. For product-specific specs, check the description above.
Not sure if Koch Maxi-Grid MG550 Antimicrobial Heavy-Duty 25" High Link Panel Filter MERV 8 - Sold by the Case is right for your system?
Call, text, or email our team. We've been sizing and spec'ing filters for homes and facilities for twenty years.
