The Maxi-Grid 300 16″ High Link Panel is the all-purpose workhorse in the 16″-high linked panel line — pre-linked 3-ply MERV 8 panels with the lowest pressure drop in the Maxi-Grid family. Initial pressure drop is 0.28″ w.g. at 400 FPM per panel with a dust holding capacity of 268 grams at 1.5″ w.g. Tackifier is encapsulated between the second and third media layers for stable performance over the service life. The standard choice for commercial buildings, hospitals, and industrial side-access AHUs with 16″ filter tracks.
What link panels are and why they matter
Link panels are pre-linked continuous strips of individual filter panels designed to drop into side-access filter housings as a single unit. Standard panel filters (front-access) install one panel at a time into a holding frame; link panels replace an entire row of filters in one motion. Two operational benefits result:
-
Eliminated air bypass: Conventional individual panels can leave gaps between filters or at the end of a track, allowing unfiltered air to pass through. Link panels are continuously joined — no gaps, no bypass.
-
Faster installation and removal: Maintenance personnel pull and replace one continuous unit per filter track instead of multiple individual panels. Significant labor savings on large air handlers.
This product covers the 16″-high panel section of the Maxi-Grid MG300 link line. Each linked unit is built around 16″-tall individual panel sections joined together. Choose the number of panels (2 through 8, or the 24-panel Master Link) based on the length of your housing track, and the panel width (16″x18″ through 16″x25″) based on your housing depth.
Need 12″-high panels instead?
If your housing uses 12″-high filter tracks rather than 16″, see the matching Koch Maxi-Grid MG300 12″ Standard Link Panel product. Same construction, same MERV 8 rating, same case-pack pricing model — just sized for shorter housings.
When Maxi-Grid MG300 16″ Link Panel is specified
-
Standard commercial HVAC with 16″ side-access housings — office buildings, schools, retail, hospitality where MERV 8 is the target
-
Hospitals and clinics — general-purpose air handling and side-access prefilter stages
-
Industrial facilities with 16″-track side-access AHUs
-
Paint spray booths — high-moisture-tolerant synthetic media is well-suited to booth environments
-
Replacement for fiberglass throwaway link filters — longer service life and better capture in the same form factor
Sizing the link panel to your housing
Each 16″ link panel is identified by two dimensions:
-
Panel count: How many 16″-tall panels are linked end-to-end. Available from 2-panel (36″-38″ total length range) up through 8-panel (176″-208″ total), plus the 24-panel Master Link (continuous extra-long unit). Select the count that matches your housing track length.
-
Panel width: 16″x18″, 16″x20″, 16″x22″, 16″x24″, or 16″x25″. Match to your housing depth.
The 16″ line offers 5 panel widths compared to the 12″ line’s 3 widths — covering more housing-depth options for taller filter tracks.
Design and construction
-
Panel height: 16″ (per individual panel section)
-
Configuration: Pre-linked continuous panel filter for side-access housings, 3-ply construction
-
Media: 100% synthetic, progressively dense (suitable for high-moisture applications)
-
Frame: Self-sealing design with steel internal support wire
-
Tackifier: Encapsulated between 2nd and 3rd layers
-
Antimicrobial: No
-
Efficiency rating: MERV 8 per ASHRAE Test Standard 52.2
-
Initial pressure drop: 0.28″ w.g. at 400 FPM face velocity (per panel)
-
Dust holding capacity: 268 grams at 1.5″ w.g. final pressure drop (per panel)
-
Listings: UL Classified per UL Standard 900
-
Reference bulletin: Koch K-902
What MERV 8 captures
Captures dust mite debris, pollen, mold spores, pet dander, and most household and office airborne dust. The standard residential and commercial efficiency for everyday indoor air quality, balancing capture performance with airflow.
Choosing across the Maxi-Grid 16″ Link Panel line
Koch offers four Maxi-Grid sub-lines in the 16″ high link panel format:
-
MG200 16″ Link (MERV 7): Most economical, 3-ply, downstream tackifier. Equipment protection and prefilter applications.
-
MG300 16″ Link (MERV 8): All-purpose workhorse, 3-ply, lowest pressure drop in the line. Standard commercial HVAC.
-
MG400 16″ Link (MERV 11): Higher efficiency, 4-ply, higher pressure drop. Light-industrial and high-IAQ commercial.
-
MG550 16″ Link (MERV 8): Antimicrobial-treated 3-ply with heavy-duty wire support. Healthcare, food processing, high-moisture sites.
Form-factor decision: 16″ Link vs. 12″ Link vs. Standard Panels
-
This product (16″ Link): Pre-linked continuous panels, 16″-tall sections, for side-access housings with 16″ filter tracks.
-
12″ Link Panel (sister product): Same construction, 12″-tall sections, for shorter side-access tracks.
-
Standard Panel (front-access): Individual panels installed one-by-one into front-access holding frames. Different form factor entirely.
Sizing and ordering notes
-
Confirm your housing track length, depth, and panel-height requirement before ordering. Match panel count to track length, panel width to housing depth, and panel-section height (16″ here) to your filter track.
-
Sold by the case. Carton quantity varies by panel count: 2-panel link = 12 units per case; 3-panel = 8; 4-panel = 6; 5-panel = 5; 6-panel = 4; 7-panel and 8-panel = 3; 24-panel Master Link = 1 per case. The variant price is the case price.
-
Need a non-standard length, width, or height? Request a quote for custom link configurations or facility-scale orders.