The Maxi-Grid 200 24″ High Link Panel is the economical entry point in Koch’s 24″-high linked panel line — pre-linked 3-ply MERV 7 panels designed to drop into 24″-tall side-access filter tracks as a single continuous unit. Initial pressure drop is 0.36″ w.g. at 400 FPM per panel with a dust holding capacity of 243 grams at 1.5″ w.g. The right pick for cost-sensitive equipment protection and prefilter applications in large side-access AHUs with 24″ filter tracks.
What link panels are and why they matter
Link panels are pre-linked continuous strips of individual filter panels designed to drop into side-access filter housings as a single unit. Standard panel filters (front-access) install one panel at a time into a holding frame; link panels replace an entire row of filters in one motion. Two operational benefits result:
-
Eliminated air bypass: Conventional individual panels can leave gaps between filters or at the end of a track, allowing unfiltered air to pass through. Link panels are continuously joined — no gaps, no bypass.
-
Faster installation and removal: Maintenance personnel pull and replace one continuous unit per filter track instead of multiple individual panels. Significant labor savings on large air handlers.
This product covers the 24″-high panel section of the Maxi-Grid MG200 link line — the tallest panel-section height in the standard Maxi-Grid family. Each linked unit is built around 24″-tall individual panel sections joined together. Choose the number of panels (2 through 8, or the 24-panel Master Link) based on the length of your housing track, and the panel width (24″x12″ through 24″x24″) based on your housing depth.
Need a different panel-section height?
If your housing uses shorter filter tracks, see the matching Koch Maxi-Grid MG200 20″ High Link Panel, 16″ High Link Panel, or 12″ Standard Link Panel. Same construction, same MERV 7 rating, same case-pack pricing model — just sized for shorter housings.
When Maxi-Grid MG200 24″ Link Panel is specified
-
Large side-access AHU equipment protection in 24″-track configurations at the lowest cost point
-
Side-access prefilter stages ahead of MERV 11+ final filters in large air handlers
-
Cost-sensitive commercial HVAC with 24″ side-access housings
-
Paint spray booth makeup air in 24″ side-access configurations
-
Industrial air handlers and rooftop units with tall side-access tracks
Sizing the link panel to your housing
Each 24″ link panel is identified by two dimensions:
-
Panel count: How many 24″-tall panels are linked end-to-end. Available from 2-panel (24″-26″ total length range) up through 8-panel (192″-200″ total), plus the 24-panel Master Link (continuous extra-long unit). Select the count that matches your housing track length.
-
Panel width: 24″x12″, 24″x16″, 24″x18″, 24″x20″, 24″x22″, or 24″x24″. Match to your housing depth.
The 24″ line offers 6 panel widths ranging from very narrow (24″x12″) to fully square (24″x24″) — covering the broadest combination of housing-depth and panel-section-height options in the standard Maxi-Grid Link family.
Design and construction
-
Panel height: 24″ (per individual panel section)
-
Configuration: Pre-linked continuous panel filter for side-access housings, 3-ply construction
-
Media: 100% synthetic, progressively dense (suitable for high-moisture applications)
-
Frame: Self-sealing design with steel internal support wire
-
Tackifier: Downstream
-
Antimicrobial: No
-
Efficiency rating: MERV 7 per ASHRAE Test Standard 52.2
-
Initial pressure drop: 0.36″ w.g. at 400 FPM face velocity (per panel)
-
Dust holding capacity: 243 grams at 1.5″ w.g. final pressure drop (per panel)
-
Listings: UL Classified per UL Standard 900
-
Reference bulletin: Koch K-902
What MERV 7 captures
Captures larger airborne dust, lint, pollen fragments, and most household and construction-grade dust. A step above basic equipment-protection filters; suitable as a prefilter or for general air handling where high efficiency is not required.
Choosing across the Maxi-Grid 24″ Link Panel line
Koch offers four Maxi-Grid sub-lines in the 24″ high link panel format:
-
MG200 24″ Link (MERV 7): Most economical, 3-ply, downstream tackifier. Equipment protection and prefilter applications.
-
MG300 24″ Link (MERV 8): All-purpose workhorse, 3-ply, lowest pressure drop in the line. Standard commercial HVAC.
-
MG400 24″ Link (MERV 11): Higher efficiency, 4-ply, higher pressure drop. Light-industrial and high-IAQ commercial.
-
MG550 24″ Link (MERV 8): Antimicrobial-treated 3-ply with heavy-duty wire support. Healthcare, food processing, high-moisture sites.
Form-factor decision: 24″, 20″, 16″, or 12″ Link — or Standard Panels?
-
This product (24″ Link): Pre-linked continuous panels, 24″-tall sections, for side-access housings with 24″ filter tracks. The tallest standard Link Panel option.
-
20″ Link Panel (sister product): Same construction, 20″-tall sections.
-
16″ Link Panel (sister product): Same construction, 16″-tall sections.
-
12″ Link Panel (sister product): Same construction, 12″-tall sections, for housings with 12″ tracks.
-
Standard Panel (front-access): Individual panels installed one-by-one into front-access holding frames. Different form factor entirely.
Sizing and ordering notes
-
Confirm your housing track length, depth, and panel-height requirement before ordering. Match panel count to track length, panel width to housing depth, and panel-section height (24″ here) to your filter track.
-
Sold by the case. Carton quantity varies by panel count: 2-panel link = 12 units per case; 3-panel = 8; 4-panel = 6; 5-panel = 5; 6-panel = 4; 7-panel and 8-panel = 3; 24-panel Master Link = 1 per case. The variant price is the case price.
-
Need a non-standard length, width, or height? Request a quote for custom link configurations or facility-scale orders.