Product details
The Maxi-Grid 200 20″ High Link Panel is the economical entry point in Koch’s 20″-high linked panel line — pre-linked 3-ply MERV 7 panels designed to drop into 20″-tall side-access filter tracks as a single continuous unit. Initial pressure drop is 0.36″ w.g. at 400 FPM per panel with a dust holding capacity of 243 grams at 1.5″ w.g. The right pick for cost-sensitive equipment protection and prefilter applications in side-access AHU configurations with 20″ filter tracks.
What link panels are and why they matter
Link panels are pre-linked continuous strips of individual filter panels designed to drop into side-access filter housings as a single unit. Standard panel filters (front-access) install one panel at a time into a holding frame; link panels replace an entire row of filters in one motion. Two operational benefits result:
- Eliminated air bypass: Conventional individual panels can leave gaps between filters or at the end of a track, allowing unfiltered air to pass through. Link panels are continuously joined — no gaps, no bypass.
- Faster installation and removal: Maintenance personnel pull and replace one continuous unit per filter track instead of multiple individual panels. Significant labor savings on large air handlers.
This product covers the 20″-high panel section of the Maxi-Grid MG200 link line — the tallest panel-section height in the standard Maxi-Grid family. Each linked unit is built around 20″-tall individual panel sections joined together. Choose the number of panels (2 through 8, or the 24-panel Master Link) based on the length of your housing track, and the panel width (20″x16″ through 20″x25″) based on your housing depth.
Need a different panel-section height?
If your housing uses shorter filter tracks, see the matching Koch Maxi-Grid MG200 16″ High Link Panel or 12″ Standard Link Panel. Same construction, same MERV 7 rating, same case-pack pricing model — just sized for shorter housings.
When Maxi-Grid MG200 20″ Link Panel is specified
- Side-access AHU equipment protection in 20″-track configurations at the lowest cost point
- Side-access prefilter stages ahead of MERV 11+ final filters
- Cost-sensitive commercial HVAC with 20″ side-access housings
- Paint spray booth makeup air in 20″ side-access configurations
- Large industrial air handlers with tall side-access tracks
Sizing the link panel to your housing
Each 20″ link panel is identified by two dimensions:
- Panel count: How many 20″-tall panels are linked end-to-end. Available from 2-panel (32″-34″ total length range) up through 8-panel (200″+ total), plus the 24-panel Master Link (continuous extra-long unit). Select the count that matches your housing track length.
- Panel width: 20″x16″, 20″x18″, 20″x20″, 20″x22″, 20″x24″, or 20″x25″. Match to your housing depth.
The 20″ line offers 6 panel widths — the broadest housing-depth range in the standard Maxi-Grid Link family (compared to 5 widths on the 16″ line and 3 widths on the 12″ line).
Design and construction
- Panel height: 20″ (per individual panel section)
- Configuration: Pre-linked continuous panel filter for side-access housings, 3-ply construction
- Media: 100% synthetic, progressively dense (suitable for high-moisture applications)
- Frame: Self-sealing design with steel internal support wire
- Tackifier: Downstream
- Antimicrobial: No
- Efficiency rating: MERV 7 per ASHRAE Test Standard 52.2
- Initial pressure drop: 0.36″ w.g. at 400 FPM face velocity (per panel)
- Dust holding capacity: 243 grams at 1.5″ w.g. final pressure drop (per panel)
- Listings: UL Classified per UL Standard 900
- Reference bulletin: Koch K-902
What MERV 7 captures
Captures larger airborne dust, lint, pollen fragments, and most household and construction-grade dust. A step above basic equipment-protection filters; suitable as a prefilter or for general air handling where high efficiency is not required.
Choosing across the Maxi-Grid 20″ Link Panel line
Koch offers four Maxi-Grid sub-lines in the 20″ high link panel format:
- MG200 20″ Link (MERV 7): Most economical, 3-ply, downstream tackifier. Equipment protection and prefilter applications.
- MG300 20″ Link (MERV 8): All-purpose workhorse, 3-ply, lowest pressure drop in the line. Standard commercial HVAC.
- MG400 20″ Link (MERV 11): Higher efficiency, 4-ply, higher pressure drop. Light-industrial and high-IAQ commercial.
- MG550 20″ Link (MERV 8): Antimicrobial-treated 3-ply with heavy-duty wire support. Healthcare, food processing, high-moisture sites.
Form-factor decision: 20″, 16″, or 12″ Link — or Standard Panels?
- This product (20″ Link): Pre-linked continuous panels, 20″-tall sections, for side-access housings with 20″ filter tracks. The tallest standard Link Panel option.
- 16″ Link Panel (sister product): Same construction, 16″-tall sections, for housings with 16″ tracks.
- 12″ Link Panel (sister product): Same construction, 12″-tall sections, for housings with 12″ tracks.
- Standard Panel (front-access): Individual panels installed one-by-one into front-access holding frames. Different form factor entirely.
Sizing and ordering notes
- Confirm your housing track length, depth, and panel-height requirement before ordering. Match panel count to track length, panel width to housing depth, and panel-section height (20″ here) to your filter track.
- Sold by the case. Carton quantity varies by panel count: 2-panel link = 12 units per case; 3-panel = 8; 4-panel = 6; 5-panel = 5; 6-panel = 4; 7-panel and 8-panel = 3; 24-panel Master Link = 1 per case. The variant price is the case price.
- Need a non-standard length, width, or height? Request a quote for custom link configurations or facility-scale orders.
Commercial & facilities
Buying filters for a building?
Volume pricing on any size or MERV, plus recurring delivery schedules. We handle facilities and commercial orders daily and can usually match or beat distributor pricing.
A filtration company, not a warehouse reseller
Family-founded in 2006, built on the back of 50 years of HVAC filtration experience. Two decades selling filters online — and we only stock what we'd put our own name behind.
Trusted manufacturers only
Every filter we sell comes from a manufacturer we've vetted — AAF Flanders, Koch, NaturalAire, PrimeShield, and a short list of others.
No marketplace-style third-party sellers swapping inventory. No overseas knockoffs relabeled with a domestic-sounding name.
Two decades online
RememberTheFilter.com has been selling HVAC filters online since 2006 — family-founded, founder-operated, and still run by the people who started it.
Schools, clinics, property managers, and homeowners have been ordering from us for years — some of them since before Amazon even sold filters.
Nationwide shipping network
Our distribution network ships from multiple U.S. locations — so most orders arrive faster than coast-to-coast routing would suggest.
Customer service is based in Lake Stevens, Washington — U.S.-based, reachable by phone, text, or email.
Buying this filter for a property, fleet, or facility?
Schools, clinics, property management, multifamily, and government facilities order from us in standing rotation. Volume pricing, tax-exempt setup, and scheduled delivery available.
What customers say about Koch Maxi-Grid MG200 20" High Link Panel Filter MERV 7 - Sold by the Case
Answers to the questions we get every day
From sizing and MERV ratings to bulk orders and subscriptions — here's what customers ask before they buy. For product-specific specs, check the description above.
Not sure if Koch Maxi-Grid MG200 20" High Link Panel Filter MERV 7 - Sold by the Case is right for your system?
Call, text, or email our team. We've been sizing and spec'ing filters for homes and facilities for twenty years.
