Product details
This 24″ × 24″ × 2″ Koch Multi-Pleat GT filter (part number 102-721-022) is a high-capacity, internally-supported pleated panel filter with MERV 8 efficiency — engineered for gas turbine inlet filtration and heavy-duty industrial commercial HVAC.
The Multi-Pleat GT delivers an unusual combination for a pleated panel: very low initial pressure drop (under 0.25″ w.g.) paired with high dust-holding capacity. The same 100% synthetic media used in Koch’s KMP XL11-HC line sits inside a moisture-resistant beverage board frame, supported by a heavy galvanized wire grid that maintains pleat geometry under turbulent or contaminated airflow. The result is a filter that holds up where conventional MERV 8 pleated panels would collapse or load too quickly.
When Multi-Pleat GT is specified
- Gas turbine inlet filtration — the original design target; durable enough for high-volume continuous-duty inlet stages
- Heavy-duty commercial HVAC — manufacturing facilities, large retail, schools, government buildings where standard pleated panels load too quickly
- Industrial pre-filter applications — ahead of higher-MERV final filters in multi-stage systems
- High-moisture environments — moisture-resistant beverage board frame paired with synthetic media handles humidity without media degradation
- Generator and compressor inlet filtration — same high-capacity construction works for any large industrial inlet application
- Variable-air-volume (VAV) systems — rigid internal wire support holds pleat structure through airflow swings
Design and construction
- Media: 100% synthetic (same media as Koch KMP XL11-HC)
- Frame: Moisture-resistant beverage board
- Support: Heavy galvanized wire grid (internally supported)
- Configuration: High Capacity only (no Standard Capacity offered in this line)
- Efficiency rating: MERV 8 per ASHRAE Test Standard 52.2-2007
- Initial pressure drop: Less than 0.25″ w.g.
- Listings: UL Classified per UL Standard 900
- Pack size: 12 filters per case
What MERV 8 captures
Captures dust mite debris, pollen, mold spores, pet dander, and most household and office airborne dust. The standard residential and commercial efficiency for everyday indoor air quality, balancing capture performance with airflow.
Multi-Pleat GT vs. Multi-Pleat Elite vs. XL8
All three are MERV 8 pleated panel filters from Koch, each tuned for a different environment. The Elite is the cleanest-disposal option (self-supporting media, fully incinerable) for standard residential and commercial HVAC. The XL8 uses an expanded galvanized steel grid for additional pleat support in demanding airflow conditions. The GT (this filter) takes the durability further: heavy galvanized wire support inside a moisture-resistant frame, High Capacity only, and the lowest initial pressure drop of the three. Choose the GT for continuous-duty industrial applications, gas turbine inlets, or commercial systems where extended service life and minimum airflow restriction are top priorities.
Important sizing and ordering notes
- Sizes listed are nominal. Actual filter dimensions are slightly under nominal — standard for the industry.
- Full carton quantities only. Per Koch’s shipping policy, Multi-Pleat GT ships in full carton quantities.
- High Capacity only. The GT line does not offer a Standard Capacity variant; if you need a lower-cost MERV 8 panel, the Multi-Pleat Elite or XL8 may be the right alternative.
Compatibility
The Multi-Pleat GT drops into standard 2″-deep pleated panel filter slots and is interchangeable with most competitive heavy-duty MERV 8 pleated panels in the same nominal size. It serves as a direct upgrade for facilities currently running standard pleated filters that load too quickly under heavy-dust or continuous-duty operating conditions.
Commercial & facilities
Need 24x24x2 by the pallet?
Volume pricing on any size or MERV, plus recurring delivery schedules. We handle facilities and commercial orders daily and can usually match or beat distributor pricing.
A filtration company, not a warehouse reseller
Family-founded in 2006, built on the back of 50 years of HVAC filtration experience. Two decades selling filters online — and we only stock what we'd put our own name behind.
Trusted manufacturers only
Every filter we sell comes from a manufacturer we've vetted — AAF Flanders, Koch, NaturalAire, PrimeShield, and a short list of others.
No marketplace-style third-party sellers swapping inventory. No overseas knockoffs relabeled with a domestic-sounding name.
Two decades online
RememberTheFilter.com has been selling HVAC filters online since 2006 — family-founded, founder-operated, and still run by the people who started it.
Schools, clinics, property managers, and homeowners have been ordering from us for years — some of them since before Amazon even sold filters.
Nationwide shipping network
Our distribution network ships from multiple U.S. locations — so most orders arrive faster than coast-to-coast routing would suggest.
Customer service is based in Lake Stevens, Washington — U.S.-based, reachable by phone, text, or email.
Buying this filter for a property, fleet, or facility?
Schools, clinics, property management, multifamily, and government facilities order from us in standing rotation. Volume pricing, tax-exempt setup, and scheduled delivery available.
What customers say about 24x24x2 Koch Multi-Pleat GT High Capacity MERV 8 102-721-022 (12 Filters)
Answers to the questions we get every day
From sizing and MERV ratings to bulk orders and subscriptions — here's what customers ask before they buy. For product-specific specs, check the description above.
Not sure if 24x24x2 Koch Multi-Pleat GT High Capacity MERV 8 102-721-022 (12 Filters) is right for your system?
Call, text, or email our team. We've been sizing and spec'ing filters for homes and facilities for twenty years.
